Frequently Asked Question

Printer - Clean Corona Wire
Last Updated 4 years ago

Follow the steps below to clean the corona wire.

  1. Open the front cover.
  2. Remove the toner cartridge and drum unit assembly from the machine.
  3. Clean the corona wire inside the drum unit by gently sliding the green tab from left to right and right to left several times.
    Clean the corona wireBe sure to return the tab to the Home position (Home position). The arrow on the tab must be aligned with the arrow on the drum unit. If it is not, printed pages may have a vertical stripe.

  4. Install the toner cartridge and drum unit assembly back into the machine.
  5. Close the front cover of the machine.

Please Wait!

Please wait... it will take a second!